Uninstall Cyanogen and restore Ouya Firmware.

Uninstall Cyanogen (sometimes referred to at CM11) and restore our Ouya back to factory using the full firmware load in the ClockWorkMod Recovery menu. There can be many reasons why you would want to restore the factory firmware onto your Ouya ranging from company actually getting off their ass and updating new software updates which makes the Ouya usable once again such as an Android OS update. To simply restoring stock because of the many bugs and glitches in Cyanogen that you simply cannot tolerate anymore. This my I have published a blog on how to install Cyanogen it is only fitting that I also publish a blog about how to remove Cyanogen as well.

Video tutorial fallback mirrors:

In case you have no-script enabled or for some reason cannot see the title video on this website. I have provided direct links for these videos.

• WebM VP9 – Link – Apple Safari and IOS users may need to download VLC to make WebM work. Otherwise, this is the newest standard of web-streaming.
• OGV – Link – the fallback codec for older PC’s and Linux USB stick OS’s. 1st generation web video streaming based on Ogg-Vorbis encoding.

Hardware per-requisites:

A USB keyboard is an absolute must as we will be going back into ClockWordMod to perform the Cyanogen uninstall. Mouse and USB hubs are not as important but helpful for navigating around Cyanogen while we acquire the files and place them into their respective folders. ADB USB to Micro-A cable is not necessary for this tutorial. If you do have this plugged in and operational you can adb push the software from your PC to your Ouya, but that is about it really.

I had to re-do my video for this blog due to the fact that the original site to get the Ouya firmware is no more and giving gateway time-out errors. But fear not! I have the latest firmware snapshot for your Ouya . Simply click on the download button on the side and place this into the /sdcard/ folder onto your Ouya. You can either download it on your PC and transfer it over. Or, you can download it with your Ouya and simply move it out of the /sdcard/download/ folder to /sdcard/ with your favorate file explorer of choice in Cyanogen Ouya.

Uninstall Cyanogen Ouya preparation:

To begin you will want to select your application menu and then clock on browser if you intend to download these files directly with your Cyanogen Modded Ouya box. If you already have the RC-OUYA-1.2.1427-r1_ota.zip in its rightful place underneath /sdcard/ you can skip to rebooting the Ouya. Now I like to use root explorer however any file explorer will work for this part of the tutorial as we will not be effecting any files that require system access. simply cut the RC-OUYA-1.2.1427-r1_ota.zip out of the /sdcard/download/ folder. Then you paste RC-OUYA-1.2.1427-r1_ota.zip into the /sdcard/ folder . Once moved you can close out of Root Explorer and/or file manager software of choice.

• If you MTP (Media Transport Protoocol) for Ouya is setup in device manager on a windows box. You should be able to see the Ouya when plugging the USB cable in. You can simple drag and drop the RC-OUYA-1.2.1427-r1_ota.zip into the /sdcard/ folder.
• If you followed the tutorial on setting up ADB on your Ouya for windows 10 or for windows in general with my screen capture tutorial, you can connect to your Ouya via USB and pass the following commands:
adb push C:\path\to\recovery\roms\RC-OUYA-1.2.1427-r1_ota.zip /sdcard/

Reboot your Cyanogen Modded Ouya into recovery.

There is two ways of going about this. One way is you can download a neat little application on Google Play called QuickBoot which simply gives you the option to switch to recovery mode. The more traditional way of course is to simply power cycle your Ouya until it comes to the Ouya Bootmenu screen that was installed with Cyanogen and using your power button on your Ouya tap until Recovery is highlighted and it will then boot into CWM Recovery mode.

Alternatives to booting your Ouya into recovery mode:

• You can plug your keyboard into the USB port of your Ouya and as you power on your Ouya you hold down the “Alt” + “PrtScrn/Print Screen” while tapping the “I” key as you power on your Ouya. This may take several tries as the window between Ouya initializing the USB port and booting is very narrow.
• If you followed the tutorial on setting up ADB on your Ouya for windows 10 or for windows in general with my screen capture tutorial, you can connect to your Ouya via USB and pass the following commands:
adb reboot recovery

Clockwork Mod – Installation of Ouya stock firmware.

As with the last time when installing Cyanogen you will see your Ouya come back to life but instead of the typical Cyanogen OS, you will be greeted with ClockWorkMod. Out of interest of saving bandwidth and readability. I shall focus on just the upper-left-hand corner of the screen which is where all of the action of ClockWorkMod is at. There will be information text with each step we do and if the screen changes to much I’ll make a full-screen shot. But Let’s begin. Using your keyboard, arrow down to “install zip” and hit enter. Arrow to “chose zip from /sdcard” and hit enter.

This alternative mode is if for some reason you cannot upload the OTA rom to the /sdcard folder due to OS corruption.

• If you followed the tutorial on setting up ADB on your Ouya for windows 10 or for windows in general with my screen capture tutorial. Choose “install zip from sideload” you can connect to your Ouya via USB and pass the following commands:
adb devices

To verify it’s out there.

adb sideload  RC-OUYA-1.2.1427-r1_ota.zip

Your PC via ADB bridge will report a percentage of how much is loaded. When it hits 100 percent it will then install the ROM file.

Back to installing zip from /sdcard/

Arrow down until you select your RC-OUYA-1.2.1427-r1_ota.zip and press enter. Note: you may have to go into the /0/ folder if you do not see this file in the root of your /sdcard/ folder. Arrow down to select – Yes and press enter. Unlike the procedure of Cyanogen OS loading where you have to load multiple partial files to complete an OS. The Ouya Firmware is actually a full load containing the bootloader and OS partitions . This will take about a minute to install due to its size.

Clearing cache and wiping user data in ClockWorkMod for Ouya stock firmware for first time boot.

Clearing all user data and cache from your Ouya is very important because if you do not. You may have unpredictable results when you attempt to boot your Ouya Firmware for the first time. It may simply sit and do nothing on the first time you boot it because it’s reading data that it really should not read. So let’s begin. If you are still updating zip files. We need to back out of this menu. Simply arrow down to Go Back and press enter. Arrow down to “wipe data/factory reset” and press enter. Arrow down to Yes and press enter. Next we will wipe the cache partition. Arrow down to “Wipe cache partition” and press enter.Arrow down to Yes and press enter. The last section requires us to go into advanced mode. Arrow down to advanced and press enter. Arrow down to “Wipe dalvik cache” which is what google play likes to use and press enter. Arrow down to Yes and press enter. We are going to back out of the advanced menu now. Arrow down to “Go Back” and press enter. Finally, we are all done with CWM we can now reboot system now to begin booting the Ouya stock firmware. Uninstall Cyanogen complete – Back to the warm glow of Ouya. If everything worked as it should you will be back to the Ouya splash screen and a welcome to pair your controller.

Final thoughts:

We’re sorry that CyanogenMOD or alternative android operating systems is not right for your Ouya. If you found this tutorial useful please share it to others which also want to restore their Ouya back to factory state. This completes the stock ROM restoration tutorial and I hope you found this useful. Thank you and have a wonderful day. END OF LINE+++

8 thoughts on “Uninstall Cyanogen and restore Ouya Firmware.”

1. ThatOtherPerson1

Thank you so much for these guides. I had a ton of fun with Cyanogen, but now it’s back to Ouya for me. :)

• S-Config

Thanks for trying it out and checking out my blog! Have fun with your Ouya!

2. Ummar Shaikh

Hi

This was a superb tutorial & I manage to recover Ouya from cyanogen Mod. The step by step guide by u is accurate so thanks a lot bro.

Ummar Shaikh
Mumbai, India.

3. I have a problem on the CWM part I do not recognize the pendriver. And I have frozen in the part of the beginning, as I do thanks.

4. Beautiful work. Like having the ease of use of the Ouya back.
Thanks!

5. Mark Nelson

THANK YOU, SO MUCH, for taking the time to reply. I really appreciate it. I was enjoying the cm11 for almost 2 weeks. Then for no reason, the sound disappeared. Got it back, but all the sounds, MP3 and video, regardless of via android or jarvis, sounds like its being slowed right down ( like pitch bending but at the bottom end of the scale ). Tried reflashing cm11. Still the same.So i will try the stock rom, to see if that helps.
Thanks again.!

6. Mark Nelson

Hi There,

Thank you for this EXCELLENT tutorial. I followed it and managed to install the CM11. Now I want to uninstall it back to this stock ROM.

If I follow these steps, will I no longer have the Ouya bootmenu and Clockwork Mod.?
I would like to have the OUYA stock rom, but stiull be able to use the Ouya bootmenu and clockwork mod.

Thank you.