XBCD – Original Xbox Controllers with Win10-8

XBCD - Getting those old controllers working again!

XBCD is an abbreviation for the "X-Box Controller Driver" Which has been around for almost as long as the Original Xbox Controllers themselves (approximately 2001-2003). As of 5/4/2017, the guide was updated to illustrate ways of installing these drivers which hopefully will answer the many questions that we get about them. This new method also no longer requires the test signing feature which also eliminates the requirement for UWD.exe which should make some of our subscribers happy.

previously

"Note: If you get a black screen but the audio is playing. Or you got a potato PC and it's studdering. We have fallback Links below."

betamax video tape - S-Config.Com

Video tutorial fallback mirrors:

In case you have no-script enabled or for some reason cannot see the title video on this website. We have provided direct links for these videos. For more information about the standards we use on this site click here if you would like to know more.

  
AV1       - Link
WebM VP9  - Link
OGV       - Link
MP4/.h264 - Link

Disclaimers:

It should be noted like any hardware or software hack that S-Config is not responsible for any physical, mental, financial, or psychological damage that may happen when following this tutorial. The drivers and software provided are intended to work in an AS-IS base. We provide no guarantees this tutorial will work for your product. Also, this website contains internal links for binary files to which we highly suggest that you invest in a good virus checker prior to downloading anything off of the internet. Trust no one! For additional and general questions refer to the FAQ of this site.

History time!

Back in the days when Microsoft got involved with the console wars. They made a bunch of controllers for their X-Box units and people began to realize that if you just splice a USB cable on the end of the proprietary connection then you could use the Xbox Controller on your PC. Microsoft at the time really didn't want to associate hardware from their console with hardware from their PC because a few corporate people back then felt it would disenfranchise their user base from actually purchasing an Xbox.

Xbox 360 and onward.

It wasn't until the introduction of the Xbox 360 that Microsoft gave support for their users to use their beloved controllers on their PCs and other devices. Even then Xbox 360 controller support for PC users was released around 2008 giving a few-year gap between its initial release date in 2005. This dongle was designed to work with the "Games for Windows" logo during Windows 7. They also mentioned that this dongle would work with "all future Xbox 360 devices." That is of course until the Xbox One came out.

Since Microsoft was very quick the bury the Xbox original console this left a void of people wondering what to do with their old hardware. Well, one of those things to do is to recycle the controller onto your PC.

XBCD development cycle.

Like all things, XBCD development stopped as many thought it wasn't necessary to develop. I even posted a blog article talking about the Wireless Xbox 360 receivers and controllers and how awesome they were. Windows XP was the last officially supported version of XBCD 0.2.7 with some 32-bit work for Windows Vista. However, for those users that want to keep their controllers going in the year 2016, yet, there's a way to keep on rocking with these controllers.

Hardware Prerequisites for XBCD and how to hook it to your computer.

Lets get the hardware section out of the way first. If you ever picked up an original Xbox controller you will notice right away its proprietary connector that is attached to the joysticks. We need to convert that connection into something a little more usable for our PC.

You could buy a converter cable.

Xbox to USB Converter Cable. Ebay - has a large assortment of cables under $10 easy. Amazon - also has these cables available as well! Thanks to Mantis Toboggan M.D.4 for finding links and the proper name for these cables. Either link you choose to buy a cable just know that we don't make any money providing eBay or Amazon links and just do it as a service for those interested in purchasing the adapter versus building one.

Make your own Xbox to USB adapter.

Lucky for us, the wiring of the Xbox joysticks is very easy, simply strip the wires down, find a USB cable you don't mind destroying, strip that down, and match the colors within the cable to the appropriate selection. The only cable you do not connect is the yellow clock/timer chip. You could use a USB A Male to Xbox female connector out of a destroyed Xbox unit like I did to preserve your original Xbox Joysticks. Or if you no longer care about authenticity and just want to get that ultra-cheap controller working then you can simply cut the cable on that joystick and add the USB cable right onto it. Original Xbox DIY Cabling Guide. You could just wire twist them on and shrink tube them together, or solder them together and then use shrink tube (preferred). It does not matter so long as the cabling is secure as we don't want this to come apart as we're playing a game. It should also be noted that if you do have an original Xbox that by splicing an Xbox male connector and a USB female you can hook things up like a USB stick (limited compatibility restricted to 2GB) for save games as well as hooking up keyboards for some of the home-brew titles that exist out there. Custom Xbox USB Hub for party games.Back in the day when you upgraded your Xbox Original case sometimes the vendor didn't feel like removing anything from the front panel such as the control panel buttons and the Xbox connectors that they wanted users to transfer their guts over as quickly as possible. Since these were held in by a few screws they were easy to extract and easy to plug into my own little case for it. Using a Cheap USB hub can be soldered all of the connectors into a single box so you have a breakout box for party games.

Software Prerequisites.

Now we can finally talk about the software side of things to get it all working on your Windows box. Some of you may wonder why we host the files directly versus referring you off to a forum or another site. The answer is simple:

A tutorial should not infect your computer with spyware!

When visiting the forums which contained this driver we were getting redirected to an ad.fly pay-per-click service. This service refused to let us download the binary until we turn off the ad block. Upon turning off the ad-block ad.fly then produced a pop-under window which immediately began an attempt to install a Trojan onto an unsuspecting user's PC. This is what happens when you don't pay for storage. Eventually, someone else will pay for it and you won't like what they will do to your good name! Infecting people's PCs with spyware/malware/ransomware is totally counterproductive to what you are trying to do which is to make an old piece of hardware work on a modern computer. Unlike other sites which will route you through hell and endanger your PC. We are not going to do that to you. Because we love you too much.

Download softwareDirect link to the XBCD Software:

I have provided a direct link for everything that you need for XBCD.

Inside this archive:
  • A Driver folder that has the same files that the XBCD script installs into C:\Program Files(x86)\XBCD\ . These are here for people who don't want to use the XBCD utility.
  • A shortcut folder that has a shortcut to the XBCD utility since the installation script may not generate this shortcut automatically.
  • x360ce-x32 and x360ce-x64 folders. These are utilities that help certain games acknowledge the fact that a legit Xbox 360 controller is hooked up when in fact it is not. Respectfully these are later versions than what XBCD installs into C:\Program Files(x86)\XBCD\ and can be used for games that require the presence of a true Xbox controller. All DLL files for Windows 10 are rolled into that folder too.
  • disable.bat and enable.bat for turning off integrity checking within Windows 10 64-bit edition.
  • As of 9/18/2017 shutdown-recovery.bat is a new addition that allows the user to manually disable integrity checking via recovery mode.
  • XBCD_Installer_0.2.7.exe - the binary file itself!

Click on the download link on the right-hand side to go grab the file. Credit goes off to RedCl0ud for this wonderful software. Everything is open source and free for anyone to add/modify to it so go nuts. Note: The compression format has changed from .zip to .7z in accordance to our 7-zip blog entry. This does not change the video or blog tutorial in any way as WinRAR will extra 7-zip files just fine.

Extraction.

XBCD v2 - file extraction. Using your favorite file extractor; Unzip all of these files to a folder you can remember. This tutorial is going to use C:\xbcd\ as the reference from here on out.

Hardware verification:

It's always a good idea to verify the hardware that is being installed whenever you are plugging in something new into your PC. This should be a habit that everyone does because it could save you hours of headaches installing drivers on the wrong device or if the device is not even detected properly. To access this either right-click on your start button or open the device manager. Or press the Windows + r key and type in the following.

mmc devmgmt.msc

The device manager window will open up. Plugin your Xbox controller now and you should see the Device Manager flicker attempting to identify the USB device. It will ultimately list the device as "Unknown device" in the "Other Devices" category. Right-Click on the Unknown Device and click "Properties". Click on the Details tab and under the property drop-down box select "Hardware Ids" In the window above we have USB\VIS_045E&PID_020&REV_0100. A VID_045E.

This game-pad is a Microsoft Xbox and has a product ID of 0202 which is the Original Xbox "Duke" controller. Vendor IDs will change if you plug in third-party controllers like Madcatz or Pelican controllers. Product IDs will also change with a third party. But can also change if you plug in the original Xbox "Duke" Controller versus the original Xbox "S" Controller. As long as it produces an ID is the only thing we are looking for here. If you see a VID_0000&PID_0000 or VID_???&PID_??? . Then your computer cannot detect the controller and you need to stop right here and identify what is wrong with your Xbox controller such as possible bad wiring or if it needs more serious repair. Installing the driver will not help if you one of those two Hardware IDs.

Installing XBCD.

Great, I have the files, I can just launch XBCD_Installer_0.2.7.exe and I'm good to go right?

If you are running Windows 7, or Windows 10 32-bit then yes. This tutorial ends for you right about now. Windows 32-bit edition does not rely on heavy driver verification. XBCD Installation Error. For the majority of users running windows 64-bit edition, this is the error that you will more than likely see if you attempt to run the setup file without doing anything. The setup files it doesn't really tell you why the installation failed. For that, we go back into the device manager. XBCD - Third-party INF does not contain digital signature information. If you attempt to install the XBCD driver from C:\XBCD\driver via the device manager. We get a more precise error as to what is going on. Simply put our driver does not have an online certificate which costs $200+ dollars a year to make windows 64 happy. In order to get around this error, we are going to have to disable some of the security which is installed into Windows 10 64-bit.

Disabling integrity checking in Windows 10 64-bit.

disable integrety checking for windows 10.We have provided a file named disable.bat within the archive which attempts to automate this process for you by elevating itself to administrator status and passing all of the commands into the windows bootloader so that it can boot with integrity checking disabled. If you don't trust my batch files you have no right to trust me. Simply open a command line with administrative access and pass the following commands.

bcdedit -set loadoptions DISABLE_INTEGRITY_CHECKS
bcdedit -set nointegritychecks ON

And reboot the PC.

The script fails and still cannot install drivers. Disabling integrity checking manually.

Sometimes windows 10 gets incredibly obnoxious about drivers and we will continue to get digital signature errors. Here is how to totally disable integrity checking manually one time so we can install the driver. Windows 10 - Restarting the computer. Click the Windows button then click on the power icon right above. While holding down your shift key and left-click the restart option.

Update 09/18/2017:

We have also included the shutdown-recovery.bat file in the XBCD-v2.zip file which simulates the same thing as holding your shift key down. If you do not like scripts and want to type this in yourself. You may do so by opening an Admin command prompt window and typing the following:

shutdown.exe /r /o

It will then give you a 10-second warning that it will now shut down your PC.

The GUI.

Windows 10 - Advanced - Choose Options. If you held down the shift key and press that restart button correctly you will be presented with a menu of something like what is above. Select Troubleshoot. Windows 10 - Advanced - Choose Advanced Options. Select Advanced options. Windows 10 - Advanced - Choose startup settings. Select Start-Up Settings. Windows 10 - Advanced - Restart the Computer. Finally, Select the "Restart" button and the computer will go into boot selection mode. Windows 10 - Advanced - Disable Signature Enforcement. You will not have a mouse in this mode. simply pressing the 7 key will be enough for the OS to reboot once more allowing you to finally be in the mode that we want to install the driver. It should also be noted that manually disabling driver signature enforcement is only good for one reboot versus the script or command-line method which is a more permanent approach to disabling signature enforcement. If you only choose the manual method of disabling integrity checking then the next time you need to install a driver you will have to go through the manual process again.

Installing the driver for XBCD

XBCD v2 Install- Device manager update driver. Now that we have straightened out integrity checking you may not want to run the XBCD wizard again. After all the XBCD control panel is installed and the driver installation wizard isn't all that helpful. So let's do this manually. Go back into the device manager and right-click on our unknown device which we confirmed was our Xbox controller earlier. Select "Update Driver Software." XBCD v2 - Let me choose the driver we want. We wish to select "Browse my computer for driver software" XBCD - v2 - Specify location of driver. In general we don't trust Windows in doing anything right. Select "Let me pick from a list of drive drivers on my computer." XBCD v2 - all devices and next. The default selection of "Show All Devices" is fine. Click Next to continue. XBCD v2 - Have disk. Select the "Have Disk..." button to continue. XBCD v2 - Specify location of driver. You can click the "Browse" button to find the folder that our driver is in. You may use the provided driver in C:\xbcd\Driver or you may also use the driver that the XBCD installer provides in C:\Program files(x86)\xbcd\Driver\ it does not matter. Once you have selected your folder click "OK" to continue. XBCD v2 - confirm driver and continue. It finds out controller which is good. If it does not then check the Hardware ID of your unknown device. Click Next to finally install this driver. XBCD v2 - Warning and confirm installation. Now that driver integrity checking is disabled we are welcomed with something a little more retro which is this window warning us that it can't verify the driver. This is very good. Click "Install this driver software anyway" and it should begin loading the XBCD driver into your Windows 10 64-bit box. XBCD v2 - driver installation complete. Driver installation is now complete. XBCD v2 - driver installation complete. The XBCD Xbox Controller driver now takes its place in the Human Interface Device category of device manager. Installation is complete and onward to the testing.

Testing the XBCD joystick..

XBCD - Joystick control without using XBCD utilities. To pull up the window above. You can press the window key + R to bring up a run prompt and type in:

joy.cpl

Then click on the Properties button. Xbox receiver on windows 10 - control menus. Alternatively, you can click on your windows logo and click on settings, devices, connected devices, and scroll down to devices and printers. XBCD v2 - testing the joystick. From here you can right-click on the XBCD Xbox Controller and click properties. XBCD - Joystick control without using XBCD utilities. But you'll notice something is different from a regular Xbox 360 controller, it is recording a lot of buttons, and the shoulder buttons are recognized as digital buttons which could mess you up in certain games that assume that every player out there has an Xbox 360 or Xbox One controller hooked up to their PC. XBCD - Shortcut and launchingSince the XBCD installation utility is very old it may not generate the necessary shortcuts for you in windows 64. I have made my own shortcut under the C:\XBCD\shoutcut folder that you can copy out to the desktop. Once you have it on your desktop. Right-click on it and Run as administrator. If you fail to run this program as an administrator it will error out on you. Selecting a profil in the XBCD utility.Once you have the XBCD utility launched you can then select a profile of XBCD 360 Emu and click the Apply button. It will then change the personality of your default classic Xbox controller into something more like the Xbox 360 controller for games on windows. This utility is insanely powerful as you can remap buttons and even accesses to digital pads which is very useful if you so happen to have any Dance Pads as you cannot hold both left-right pots down simultaneously with the default windows joystick mapping. XBCD - With Xbox 360 emu profile running in default windows joystick test. Now if you go back to your windows joystick test program, you will see that the layout is behaving more like a standard Xbox 360 controller and your shoulder buttons are back with their analog hat feel to them.

Disclaimers, security, and integrity concerns about Windows 10:

But S, isn't it dangerous to run windows 64 bit with the integrity checking disabled and test signing on?

I'm no MCSE expert but I'm going to say "Yes." However, it makes you about as vulnerable as a windows 7 box. Microsoft keeps adding more and more layers of security to their OS in the hopes of keeping bad things out such as malware and ad-ware affecting the very core of your operating system. Turning off those sections could invite some of those in maybe. But if you are like me and have a dedicated PC assigned to couch gaming or emulators if something or someone breaks into it it's a low-risk item and thus you can simply USB stick reload it and get back to normality. If you are on a PC with highly sensitive data then you probably shouldn't be doing this level of hacking/modding to your windows 10 box. Please consider purchasing an Xbox One controller and receiver if you are uncomfortable with hacking and want a controller that can integrate seamlessly into Windows 10.

Public Driver Signature.

Going through the grueling process of getting the XBCD driver publicly certified underneath windows 10 is one option available to avoid going through all of the hacking with "Test Mode". Also, allowing the driver to install just like windows XP and 7.

S, can you make a publicly signed version of this driver for us?

Costs money to do it. The last time I checked it costs around $200(USD)/yr to maintain a valid domain signature to assign to drivers that are personally made. The team the developed XBCD is all open source. So if someone wants to get the public certification to do it by all means! It would save me from having to write out all of this!

Devices compatible with XBCD.

XBCD - Vendor and Product ID Pulling directly from the xbcd.inf file is a list of vendor IDs you may find within the device manager that will verify that your controller does indeed work with the XBCD driver. Keep in mind these are only the drivers detected. If you have a controller not listed here you can manually install but success may not be guaranteed. For example, my Pelican Wireless Controllers and my Pump-It-Up Dance Pads for Xbox I had to manual install and it works despite not being on the driver's listing.

Original Xbox Controller for XBCD

Vendor / Product IDControl TypeDescription
USB VID_3767&PID_0101 Steering Wheel Fanatec Speedster 3 Forceshock
USB VID_0E8F&PID_0201 Steering Wheel Gamexpert PS2/GC/Xbox Steering Wheel
USB VID_06A3&PID_0200 Steering Wheel Saitek Racingwheel
USB VID_062A&PID_0033 Steering Wheel Competition Pro Steering Wheel
USB VID_044F&PID_0F10 Steering Wheel Thrustmaster Modena GT
USB VID_044F&PID_0F03 Steering Wheel Thrustmaster Wheel
USB VID_044F&PID_0F00 Steering Wheel Thrustmaster Wheel
USB VID_FFFF&PID_FFFF GamePad Controller PowerWave Xbox Controller
USB VID_0F30&PID_0202 GamePad Controller Big Ben XS Xbox Controller
USB VID_0E6F&PID_0008 GamePad Controller After Glow Pro Controller
USB VID_0E4C&PID_3510 GamePad Controller Radica Gamester
USB VID_0C12&PID_880A GamePad Controller Nyko Xbox Controller
USB VID_0C12&PID_8802 GamePad Controller Nyko Air Flow
USB VID_0C12&PID_8801 GamePad Controller Nyko Xbox Controller
USB VID_0C12&PID_0005 GamePad Controller Intec wireless
USB VID_0738&PID_4588 GamePad Controller MadCatz Blaster
USB VID_0738&PID_4586 GamePad Controller MadCatz MicroCon Wireless Controller
USB VID_0738&PID_4556 GamePad Controller MadCatz Lynx Wireless Controller
USB VID_0738&PID_4536 GamePad Controller MadCatz Microcon Xbox Controller
USB VID_0738&PID_4526 GamePad Controller MadCatz 4526
USB VID_0738&PID_4520 GamePad Controller MadCatz Control Pad Pro
USB VID_0738&PID_4516 GamePad Controller MadCatz 4516
USB VID_06A3&PID_0201 GamePad Controller Saitek Adrenalin
USB VID_05FE&PID_3031 GamePad Controller Chic Controller
USB VID_05FE&PID_3030 GamePad Controller Chic Controller
USB VID_046D&PID_CA88 GamePad Controller Logitech Thunderpad
USB VID_046D&PID_CA8A GamePad Controller Logitech Cordless Precision
USB VID_045E&PID_0289 GamePad Controller Microsoft Xbox Controller S
USB VID_045E&PID_0287 GamePad Controlelr Microsoft Xbox Controller S
USB VID_045E&PID_0285 GamePad Controller Microsoft Xbox Controller S
USB VID_045E&PID_0202 GamePad Controller Microsoft Xbox Controller
USB VID_044F&PID_0F07 GamePad Controller Thrustmaster Controller

Xbox 360 Controllers for XBCD

Vendor/Product IDControl TypeDescription
USB VID_12AB&PID_8809 StepPad Controlelrs Konami DDR Pad
USB VID_12AB&PID_0004 StepPad Controllers Konami DDR Pad
USB VID_0C12&PID_8809 StepPad Controllers RedOctane Ignition Pad
USB VID_0738&PID_6040 StepPad Controllers MadCatz Beat Pad Pro
USB VID_0738&PID_4743 StepPad Controllers MadCatz Beat Pad Pro
USB VID_0738&PID_4740 StepPad Controllers MadCatz Beat Pad 360
USB VID_0738&PID_45FF StepPad Controllers MadCatz Beat Pad (w/ Handle)
USB VID_0738&PID_4540 StepPad Controllers MadCatz Beat Pad (w/ Handle)
USB VID_1430&PID_4748 Guitar Controller RedOctane X-plorer Guitar
USB VID_046D&PID_CAA3 Steering Wheel Logitech DriveFX Wheel
USB VID_1BAD&PID_F900 GamePad Controller Afterglow AX.1 Wired controller
USB VID_1BAD&PID_F502 Stick Controller Hori HRAP VX-SA
USB VID_1BAD&PID_F501 Stick USB VID_1BAD & PID_F900 Controller HORI Pad EX2 Turbo
USB VID_1BAD&PID_F016 GamePad Controller Mad Catz Xbox 360 GamePad
USB VID_162E&PID_BEEF GamePad Controller Joytech SE for 360
USB VID_0F0D&PID_000D Stick Controller HORI EX2 Fighter Stick
USB VID_0F0D&PID_000C Stick Controller HORI Pad EX Turbo
USB VID_0F0D&PID_000A Stick Controller HORI DOA4 Stick
USB VID_0E6F&PID_0201 GamePad Controller Pelican XSZ Wired Controller (Model #PL-3601)
USB VID_0738&PID_BEEF GamePad Controller Joytech NEO Se Advanced
USB VID_0738&PID_B738 Stick Controller Madcatz Arcade Fightstick Tournament edition.
USB VID_0738&PID_4738 Stick Controller MadCatz Arcade Gamestick (Street Fighter IV Fightstick TE)
USB VID_0738&PID_4736 GamePad Controller MadCatz 360 MicroCon
USB VID_0738&PID_4728 Stick Controller MadCatz Street Fighter IV
USB VID_0738&PID_4726 GamePad Controller MadCatz Pro for Xbox 360
USB VID_0738&PID_4718 Stick Controler MadCatz Street Fighter IV Fight Stick
USB VID_0738&PID_4716 GamePad Controller Madcatz Xbox 360 Controller
USB VID_06A3&PID_F51A GamePad Controller Saitek P3600
USB VID_046D&PID_C242 GamePad Controller Logitech Chillstream
USB VID_045E&PID_028E GamePad Controller Microsoft Xbox 360 Controller

Unsupported devices by XBCD

Vendor/Product IDControl TypeDescription
USB Vid_045E&Pid_0719 GamePad Controller Microsoft Xbox 360 Wireless Controller

You can simply visit the blog about wireless controllers if you have a problem with the wireless Xbox 360 Controllers.

Notes about modern gaming.

x360ce-title

Check out the x360ce tutorial to provide xinput version 1.2 and 1.3 for modern games.

It should be noted that the old XBCD driver only gives support for classic xinput version 1.0. Whereas a lot of modern games are expecting xinput 1.2-1.3. This is why in many cases the joy.cpl calibration will work perfectly fine but a modern game simply refuses to detect the aging Xbox controller. I have created an addendum blog to this called the x360ce utility which allows you to apply a patch to use xinput 1.0 in games that refuse to do so.

Final thoughts.

It's still amazing that you can get controllers from almost 15-16 years ago operating on the latest operating system and computers. It's a perfect solution for those who are looking for cheap controllers. You can find these controllers at various thrift stores and other surplus stores ranging from $1-5 USD. The value can of course change as time moves on and these controllers start to build collectors' value. You can also mess with people by showing them the original Xbox controller named "The Duke" because you needed man-hands to use it!:) I compiled this tutorial because we were getting tired of searching through dead-end forums over and over again. I hope you find it useful.

Until then, have fun, and server protect you.

END OF LINE+++

272 thoughts on “XBCD – Original Xbox Controllers with Win10-8

  1. Hello, thank you for your guide. I was able to follow it and install the drivers by disabling digital signing.
    Initially,, my XBCD setup as well as my Devices and Printers both registered my controller as working.
    However, with those steps done I wasn't able to use the controller in games.

    With a bit of tinkering, I realized that it was due to the buttons being registered as Button 1, Button 2, etc, as opposed to Button A, Button X, etc.
    To fix this I downloaded Xbox 360 controller emulator: https://www.x360ce.com/

    Once I opened it, I added my OG Xbox controller as the input device, and started recording the inputs for each button accordingly.
    Here's a screenshot of what it looked like after I was done: https://i.imgur.com/FFMMlIy.png

    Now I'm able to play Apex Legends no problem on my original Xbox s-type controller, which is honestly the coolest thing ever.
    I'll remain a mouse / keyboard player, but just the fact I can use an original Xbox controller to play games on PC makes me very happy.

    Again, Thank you for your guide, as I probably wouldn't have ever bought the adapter online and tried this if it wasn't for this site.
    Good luck to anyone who tries this!

    Reply
  2. Hi,

    I used the drivers and followed the install procedures, but the emu feature is not coming up as that field is blank. I have a Thrustmaster Top Gun Fox 2 Pro attached with the correct USB adapter.

    IS there something that I have missed or perhaps this joystick will not work on the PC?

    Thank you

    Reply
  3. In the text, indicate that x360ce-x32 and x360ce-x64 folders are included in the download for w10-64 games. However, they are not present and my wired controller does not work. Is the text incorrect?
    Kind regards, Joop

    Reply
  4. Gave this a shot to try to get my Duke working with the Master Chief Collection on my PC, but the triggers seem to have nothing but issues. If I get in-game, it fires randomly and often in long intervals, and when it isn't firing, it often lobs grenades. Elements like map selection are also impacted, but no amount of configuration or lack thereof seemed to change anything.

    Reply
    • I have the same problem, but with Xenia emulator. I can't quite figure it out either; If I plug in a 360 controller and open joy.cpl on windows, the controller shows as using X/Y for left stick, Xrot/Yrot for right stick, and a shared Z axis for the triggers. When I set up the exact same configuration on XBCD, the joysticks work fine, but the triggers don't work. They fire as R trigger always on unless you hold it down (so button always firing unless held) and L trigger does nothing. If I set it to a split axis, however, then L and R are both constantly on, unless held, which turns them off.

      It looks like what is happening is that the Xbox controller sends the opposite signal of what xenia expects, meaning that when xenia expects your button press threshold to go down from 100 to 0, XBCD sets the buttons to send data as going up, from 0 to 100 (or maybe the buttons just work this way). I might be missing it, but if there is a setting or configuration in XBCD or in windows itself to change the information of the trigger buttons from working as going from 50 to 100 to going from 100 to 0, then that should in theory fix this kind of issue.

      My hope is that the original post creator, or someone else who is familiar with this, can help to address this issue. It's an unfortunate case, as otherwise this works 100%, but for this one difficulty.

      Reply

Leave a Comment to the Void