Uninstall Cyanogen and restore Ouya Firmware.

Uninstall Cyanogen from your Ouya.

Uninstall Cyanogen (sometimes referred to at CM11) and restore our Ouya back to factory using the full firmware load in the ClockWorkMod Recovery menu.

There can be many reasons why you would want to restore the factory firmware onto your Ouya ranging from company actually getting off their ass and updating new software update which makes the Ouya usable once again such as an Android OS update. To simply restoring stock because of the many bugs and glitches in Cyanogen that you simply cannot tolerate anymore. This my I have published a blog on how to install Cyanogen it is only fitting that I also publish a blog about how to remove Cyanogen as well.

Read moreUninstall Cyanogen and restore Ouya Firmware.

Cyanogen Mod CM11 and the Ouya.

Cyanogen mod the Ouya.

Why Cyanogen Mod (sometimes refered to at CM11) you ask? The future of Ouya and the news of the most recent acquisition of the company to Razer has made a lot of Ouya owners such as myself feel rather uneasy with the consoles business as a whole. Couple this with an aging OS to the point where some favorite applications such as Kodi no longer work under android 4.1 due to programming issues. Razer is now stating that they will keep the Ouya servers up for another year. But then what? I guess they pull the plug and tell console owners such as myself to buy the next latest/greatest razer box. To which I will probably laugh and buy an Nvidia shield if I were to ever get an android box again. But that’s not the point of this blog entry.

previously

Read moreCyanogen Mod CM11 and the Ouya.

Xbox 360 receiver install for Windows 7

Archived  for the Xbox 360 receiver for those who are running older OS’s such as myself.

Note: If you came to this blog first and have a windows 10 operating system please click here to read the original blog article which will give you fresh screen shots and video tutorials on how to install the Chinese receiver onto your Windows 10 device. For those who are running Windows 7 and earlier operating systems continue reading!

Read moreXbox 360 receiver install for Windows 7

Archived – Xposed installer for Ouya v2.1.4

This post is here to archive the old procedure of Xposed for Ouya 2.1.4

If you have stumbled onto this page because the xposed framework is what you need to root your Ouya and this page is here only for historial reasons. Click here for the updated documentation on rooting your Ouya.

previously, previously

Read moreArchived – Xposed installer for Ouya v2.1.4

Ouya Support – Other troubleshooting issues.

Welcome to Ouya Support time with S-Config!

I notice a lot of people come to my site for various support topics for the Ouya and I figured that I should make an article dealing with some of the Ouya Support in terms of troubleshooting issues that were simply too small to exist under one article. These are questions which pop up time and time again in forums as well as on reviewers that decide is a fatal flaw of the console. Just a kind note that your Ouya has a 1 year warranty from the time of your purchase to be sure to keep that sales receipt in case something catastrophic happens to it.

Read moreOuya Support – Other troubleshooting issues.

Xbox 360 Receiver – Manual Install.

Manual installation of Xbox 360 Receiver Drivers.

There has been several complaints about the error in my blog stating that installing the xbox 360 receiver drivers just by launching the executable does nothing or that users so not have a “Microsoft Controller” class that they are capable of choosing from. This documentation is to provide a manual install of how to install the Xbox 360 receiver drivers without ever having to install them onto your computer.

Read moreXbox 360 Receiver – Manual Install.

Bullet – physics installation for OpenSim

Introduction to Bullet:

Bullet is the modern physics engine that the OpenSim development team are heading towards during the version 8.x builds of OpenSim. Although it’s only bullet version 3.x it provided a more robust collision detection for regions to make them feel more like the Second Life regions. It is uncertain of Bullet development will continue with the introduction of AviNations code-merge of their updated ODE Physics which allow for better prim sitting and vehicle crossing from region to region. Currently, although you can follow all of the steps and compile bullet onto your Arm based Pi. Bullet simple does not run and you must run Bullet in XNA mode which isn’t optimal.

Read moreBullet – physics installation for OpenSim

ODE Physics OpenSim Install

ubODE / ODE physics installation for OpenSim:

Update 11/25/2015: ODE / OpenDyanamics engine instructions have been updated to reflect the following changes to OpenSim 9.0 after the merging of code. If you are still looking for the original instructions feel free to click here. as of 11/26/2015 a massive update to the ODE physics called ubODE was introduced to many of the OpenSim environments. Making it run better then bullet on slower machines such as the Pi.

Read moreODE Physics OpenSim Install