Linux, ADB, Raspberry Pi, Ouya? Lineage? Really?

Linux ADB into your Ouya via the Raspberry Pi? With SSH even?!?! It’s more likely then you think!

With Razer finally pulling the plug on Ouya’s servers on June 25 of 2019. June 25, 2013, marks the birth date of the Ouya’s initial release (not bad for a console that was only designed to last for a few years). Users and preservationists have been scattering the net to find a way to keep these silver boxes running into 2019 and beyond. Of course, a lot of them have found our original Cyanogen blog entry.¬†This article is helping people to this very day in getting rid of the Stock Ouya firmware and loading it with something that no longer requires Ouyas Authentication servers. For all of those which have come to our blog for help. Allow us to thank you for visiting this independent blog and hope that you found the answers you were looking for.

But as time progresses so does the way we think, the way we hack our android boxes. Read on if you want to know more.

Read moreLinux, ADB, Raspberry Pi, Ouya? Lineage? Really?

Ouya overscan issues – Cyanogen, ASOP, Lineage

Addressing overscan issues. The reason why overscan does not affect the stock Ouya is simply put they placed all of their lettering near the center of the screen for all of their actions. Leaving a large margin produces less of a need for a user to demand overscan to be fixed.   ¬† Flat-panel televisions … Read more

Section 5: Restoring your Ouya Firmware.

Firmware restore on the Ouya.

When playing with android OS there needs to be an “Undo” button when it comes to the Firmware. The Ouya is no different. Perhaps as a user, you’ve grown tired of playing with Lineage. Perhaps you are going to sell your Ouya on eBay and you don’t want any data left on the thing. Or you’re trying to bring a soft-bricked Ouya back to life. Whatever the case may be this tutorial is here to help you wipe whatever that is on your Ouya and bring it back to factory defaults.

This is considered “Section 5” of a long tutorial about Ouya because like all of the previous sections we’ll be relying on the Raspberry Pi or a Linux box to perform these tasks instead of going through the sheer pain of using ADB on a Windows environment. Also, some of the beginning sections are required for those who have never used a Linux box in their life.

Without further delay, let’s dive in shall we?

Read moreSection 5: Restoring your Ouya Firmware.

Section 4: Tweaking Lineage.

Tweak the hell out of that Ouya Lineage.

This article dives into your Ouya’s afterlife that now that you have loaded the Lineage OS your game console isn’t necessarily customized for that some settings may need to be played with to make the experiencing a little more acceptable for general use. We can’t go through every possible scenario as that would make a few minute video turn into hours and hours of video and further drive this blogger down the path of insanity. But we hope to at least answer some of the more commonly asked questions throughout this article.

Read on if you want to know more.

Read moreSection 4: Tweaking Lineage.

Section 3 : Method 2: ADB “Push” Lineage from Raspberry Pi to Ouya.

ADB Sideloading Lineage onto your Ouya via Raspberry Pi.

This tutorial assumes that you have already set up your base Raspberry Pi OS and that you are either operating locally on the Pi or via SSH from another PC. This tutorial uses a more traditional “Push” method that we’ve used in previous tutorials such as Cyanogen but updated for performing the same task underneath Lineage. This tutorial also assumes that This is our current 2019 method of flashing and programming Ouya and Android devices due to the nature of commercial OS’s locking the security down on hardware devices. If you have already unlocked ADB on your commercial OS and you have the ADB bridge drivers installed you can follow along on that OS with this tutorial.

Read on if you want to learn more.

Read moreSection 3 : Method 2: ADB “Push” Lineage from Raspberry Pi to Ouya.

Section 3 : Method 1: ADB Sideloading Lineage from Raspberry Pi to Ouya.

ADB Sideloading Lineage onto your Ouya via Raspberry Pi.

This tutorial assumes that you have already set up your base Raspberry Pi OS and that you are either operating locally on the Pi or via SSH from another PC. This tutorial dives into the ability to sideload all of the packages required for the OS known as Lineage, which is a rebirth of the Cyanogen project in previous tutorials that we have done. This tutorial also assumes that This is our current 2019 method of flashing and programming Ouya and Android devices due to the nature of commercial OS’s locking the security down on hardware devices. Read on if you want to learn more.

Read moreSection 3 : Method 1: ADB Sideloading Lineage from Raspberry Pi to Ouya.